Aside from the fact I'm not qualified, it's important to understand I normally do not make nor give legal advice.
But, due to the recent arrest of a former Marine and subsequent incarceration for 'psychiatric' review, I believe the following video very important to any American who exercises their God given right to self-defense. In short, if you own, carry or use a firearm in this country please take a few moments from your very busy life and watch.
This video has been around the block but its message is timeless.
On YouTube you will find parts two and three. H/T, Survivalblog.
Stephen
Autumn

Friday, August 31, 2012
Fire
My friend, That Guy, posted a cool picture of his new Coleman lantern last night. Since I'm on a Coleman equipment kick I made a comment to him I'd post other pictures too. I said I'd post photos taken of my Coleman 502 Single Burner Stove.
I lied.
This is my new/old Coleman Peak Backpack Stove made in Canada by Coleman. It's small enough to fit in the palm of my hand. Burns white gas or Coleman fuel. With an adapter it will also use kerosene.
Notice the orange flame. She's in the warm stage. After about a minute she'll be ready to kick a pot of waters butt.
Now, she's a hot blue beauty. Ready to prepare your meal. It'll boil a pot of water in about three minutes.
I haven't as yet had a chance to unload and fire my Coleman 502. Give me a few days and I'll post pictures of her too. These little cooking gems can still be found on Ebay. Bid carefully and be aware of the shipping cost.
Seems I have a Coleman bug....it's addictive.
Remember, try and live by the rule of three.
Stephen
I lied.
This is my new/old Coleman Peak Backpack Stove made in Canada by Coleman. It's small enough to fit in the palm of my hand. Burns white gas or Coleman fuel. With an adapter it will also use kerosene.
Notice the orange flame. She's in the warm stage. After about a minute she'll be ready to kick a pot of waters butt.
Now, she's a hot blue beauty. Ready to prepare your meal. It'll boil a pot of water in about three minutes.
I haven't as yet had a chance to unload and fire my Coleman 502. Give me a few days and I'll post pictures of her too. These little cooking gems can still be found on Ebay. Bid carefully and be aware of the shipping cost.
Seems I have a Coleman bug....it's addictive.
Remember, try and live by the rule of three.
Stephen
Thursday, August 30, 2012
The Gold Standard
From the Wall Street Journal:
It's about time.
Stephen
BY SETH LIPSKY
An under-reported development of this campaign season is the Republican Party's decision this week to send Gov. Mitt Romney into the presidential race on a platform effectively calling for a new gold commission. The realization that America's system of fiat money is part of its economic problem is moving from the fringes of political discussion to the center.It's about time.
Stephen
Wednesday, August 29, 2012
Lost and Found
I think I've mentioned my efforts in reorganizing my ammunition and reloading supplies. It's been awful hot out in the garage even with the door open. So I rush in to sort and stack then rush back out.
During one of my hot dashes I came across this bundle. It had fallen behind some ammo cans. Said to myself, "Self, what have we here...."
Self answered, "Well, you idiot, it's a bag filled with 7.62x39 ammunition loaded on stripper clips." Indeed, a bag of lost gold. One of my AK-47 clones will be very happy when the zombies attack.
I return to my labors. I stretch and tug and move debris from my path and reach down and pull out a plastic bag. Sweat drips into my eyes. I say a few choice words. Slap the bag down and I hear this 'clank.' I ignore it in a mad dash back inside for a tall glass of iced tea.
As I drink and soak in the cool air I remembered that 'clank.' Back in the heat of the demon garage I bend and grab the plastic bag. Self asked, "What have we now."
When the bag was opened, self smiled. Well I'll be damned, eleven (count 'em) AR-15 green follower magazines. Twenty rounders.
I own too much stuff.
Stephen
During one of my hot dashes I came across this bundle. It had fallen behind some ammo cans. Said to myself, "Self, what have we here...."
Self answered, "Well, you idiot, it's a bag filled with 7.62x39 ammunition loaded on stripper clips." Indeed, a bag of lost gold. One of my AK-47 clones will be very happy when the zombies attack.
I return to my labors. I stretch and tug and move debris from my path and reach down and pull out a plastic bag. Sweat drips into my eyes. I say a few choice words. Slap the bag down and I hear this 'clank.' I ignore it in a mad dash back inside for a tall glass of iced tea.
As I drink and soak in the cool air I remembered that 'clank.' Back in the heat of the demon garage I bend and grab the plastic bag. Self asked, "What have we now."
When the bag was opened, self smiled. Well I'll be damned, eleven (count 'em) AR-15 green follower magazines. Twenty rounders.
I own too much stuff.
Stephen
Tuesday, August 28, 2012
Out of The Blue
The old timer walks in and hands me a canvas sack. Inside I find three boxes of 16 gauge shotgun shells and three loose paper hulled number one buckshot.
I give him a questionable look.
He said, "I don't need 'em anymore. Gave my guns away twenty years ago. Found them in the closet and knew you'd like to have them. Well, you do want them, don't ya?"
"Yes, Sir, and thank you. May I give you a few dollars for the shells?"
He said no and we chatted a while longer. After a few minutes he ambled towards the door. I again said thanks. Just before he left he smiled and said, "Knew you'd like the red box."
You've got to love old timers.
Stephen
I give him a questionable look.
He said, "I don't need 'em anymore. Gave my guns away twenty years ago. Found them in the closet and knew you'd like to have them. Well, you do want them, don't ya?"
"Yes, Sir, and thank you. May I give you a few dollars for the shells?"
He said no and we chatted a while longer. After a few minutes he ambled towards the door. I again said thanks. Just before he left he smiled and said, "Knew you'd like the red box."
You've got to love old timers.
Stephen
Highly Recommended
A couple of nights back I made fajitas. I used a new salsa. I fell in love.
Not the greatest picture in the world. This is a shot of my butcher block where I laid the jar on its side but I think you can read it. The brand is 'Mateo's.' The taste is great. I purchased the jar at Costco. Yes, for you poodle walkers out there it is organic. Trust me, try it.
Stephen
Not the greatest picture in the world. This is a shot of my butcher block where I laid the jar on its side but I think you can read it. The brand is 'Mateo's.' The taste is great. I purchased the jar at Costco. Yes, for you poodle walkers out there it is organic. Trust me, try it.
Stephen
Monday, August 27, 2012
Rainy Day and Rust
The so called hurricane, for my neck of the woods, has proven to be a wuss. Thank the Good Lord. Most of the day we've had a nice steady rain with a periods of gusty wind. Nice day to spend my time with the garage door open at work on one of my current projects.
I recently purchased a sad and rusty Coleman 413G stove and two lanterns off Craigslist, cheap. I've always wanted to try and restore a Coleman stove. But, I'm not a mechanical minded kinda guy. It was the mechanical part of the stove rebuild that held me back.
Then I remembered one of my best friends is a marine mechanic and has the ability to rebuild any carburetor in his sleep but failed miserably when he tried to can beans and peaches. With him in mind I thought how hard could it be to try my hand at restoration. After all, I can at least can a green bean.
She's a mess, isn't she...notice the top where the latch is located....awful rust. I begin with disassembly.
Top, my two lanterns. The blue one is a Coleman model sold by Sears. I believe she's dated 1963. The green one is a 1968. They'll be restored after the stove is finished.
Above, I've taken out the burner assemblies. Notice the drip plate. It should be silver but is covered in grease, rust, and baked on carbon. About thirty years worth.
Drip plate and gas assembly removed. I was having my doubts.
I began with the lid. I removed every trace of rust. If you decide to use your Dermal tool make sure you purchase several of those little wire wheels. I wore out two. They work well for the latch and handle and tiny hard to reach areas of the stove body.
The lid finished, I next tackled the drip pan. First, all grease must be removed. I used an old litter box filled with hot water and Dawn liquid. Not sure if you can see the difference between the left side and the right of the pan but it worked like a charm. I then took the dry degreased part over to my bench grinder and used my wire wheel to remove the stubborn carbon deposits and surface rust.
Above, nice. A clean grease and rust free drip pan. Make sure to pay special attention to the folds, edges and underside. Then again I'm kinda anal...
Above, now it's time to begin the hard part...the body of the stove. I first applied a good dose of Simply (or Simple, can't remember) Green. As a matter of fact I sprayed it two hours prior. Let it soak. The grease and any oils must be removed before you use sand paper otherwise it'll just gum the pours of the paper. I used my palm sander and 80 grit black zirconium paper. If you think you'll only need two packs, buy four.
Above, notice the date stamp. 2 - 73, or as you well know, February 1973. If the date isn't stamped on the body look under the gas tank tabs. The tabs are those little ears you slide into the slots on the front of the stove case. The date will always be stamped on both ears.
Progress.
An hour later and she looks much better. The latch and handle required special attention from my Dremil. Please, wear eye protection. I lost count of the number of little wires that struck me on my face.
Almost.
Next I tackled the gas assembly. When I first removed it from the case it was covered in rust.
I next cleaned the gas tank after I first disassembled the gas generator and cleaned the needle and tube. Next I degreased the body with an application of Simply Green. Be gentle. The paint will come off easily and if you do not plan to replant you will remove most of the paint. Notice its pink instead of red. I will paint the tank. Take note of the tube. It was black with carbon before I took it over to my wire wheel.
I love the 'made in the U. S. A.' stamp. I failed to mention these stoves are no longer manufactured. Coleman has been sold. Any item you see with the Coleman logo is now made in China. The man that sold me this stove said, "You know, they use kerosene." I smiled. They actually burn white gas or Coleman fuel.
With the exception of the grill, which I have soaking in my mixture of Simple Green and Dawn, the stove is ready for paint. You've just experienced about five hours of labor....and fun.
Stephen
I recently purchased a sad and rusty Coleman 413G stove and two lanterns off Craigslist, cheap. I've always wanted to try and restore a Coleman stove. But, I'm not a mechanical minded kinda guy. It was the mechanical part of the stove rebuild that held me back.
Then I remembered one of my best friends is a marine mechanic and has the ability to rebuild any carburetor in his sleep but failed miserably when he tried to can beans and peaches. With him in mind I thought how hard could it be to try my hand at restoration. After all, I can at least can a green bean.
She's a mess, isn't she...notice the top where the latch is located....awful rust. I begin with disassembly.
Top, my two lanterns. The blue one is a Coleman model sold by Sears. I believe she's dated 1963. The green one is a 1968. They'll be restored after the stove is finished.
Above, I've taken out the burner assemblies. Notice the drip plate. It should be silver but is covered in grease, rust, and baked on carbon. About thirty years worth.
Drip plate and gas assembly removed. I was having my doubts.
I began with the lid. I removed every trace of rust. If you decide to use your Dermal tool make sure you purchase several of those little wire wheels. I wore out two. They work well for the latch and handle and tiny hard to reach areas of the stove body.
The lid finished, I next tackled the drip pan. First, all grease must be removed. I used an old litter box filled with hot water and Dawn liquid. Not sure if you can see the difference between the left side and the right of the pan but it worked like a charm. I then took the dry degreased part over to my bench grinder and used my wire wheel to remove the stubborn carbon deposits and surface rust.
Above, nice. A clean grease and rust free drip pan. Make sure to pay special attention to the folds, edges and underside. Then again I'm kinda anal...
Above, now it's time to begin the hard part...the body of the stove. I first applied a good dose of Simply (or Simple, can't remember) Green. As a matter of fact I sprayed it two hours prior. Let it soak. The grease and any oils must be removed before you use sand paper otherwise it'll just gum the pours of the paper. I used my palm sander and 80 grit black zirconium paper. If you think you'll only need two packs, buy four.
Above, notice the date stamp. 2 - 73, or as you well know, February 1973. If the date isn't stamped on the body look under the gas tank tabs. The tabs are those little ears you slide into the slots on the front of the stove case. The date will always be stamped on both ears.
Progress.
An hour later and she looks much better. The latch and handle required special attention from my Dremil. Please, wear eye protection. I lost count of the number of little wires that struck me on my face.
Almost.
Next I tackled the gas assembly. When I first removed it from the case it was covered in rust.
I next cleaned the gas tank after I first disassembled the gas generator and cleaned the needle and tube. Next I degreased the body with an application of Simply Green. Be gentle. The paint will come off easily and if you do not plan to replant you will remove most of the paint. Notice its pink instead of red. I will paint the tank. Take note of the tube. It was black with carbon before I took it over to my wire wheel.
I love the 'made in the U. S. A.' stamp. I failed to mention these stoves are no longer manufactured. Coleman has been sold. Any item you see with the Coleman logo is now made in China. The man that sold me this stove said, "You know, they use kerosene." I smiled. They actually burn white gas or Coleman fuel.
With the exception of the grill, which I have soaking in my mixture of Simple Green and Dawn, the stove is ready for paint. You've just experienced about five hours of labor....and fun.
Stephen
Subscribe to:
Posts (Atom)